Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Washing machine overflow but main supply/machine were off
[ 10 Answers ]
Went away on Tues and came back today. Before I left I shut off the main water supply at the hot water heater. I turned on fawcett in the kitchen to see if it was off. Trickled for a second so I assumed it was off. Came back tonight and washing machine was filled to the top and I think it...
Replace lid switch on whirlpool washing machine model # LSQ9010PW2
[ 2 Answers ]
Washer stopped working. Will fill up but does nothing after that. I was told it is most likely the lid switch so I replaced the lid switch and that did not fix the problem. No matter what setting I use (other than fill), nothing happens -- no noise, no action, nothing. Tried opening and closing...
Installing waste pipe supply pipes for a washing machine in the basement
[ 2 Answers ]
I want to install the washing machine in the basement. There is a 2" kitchen waste pipe 2' away from the proposed washing machine location. The kitchen waste pipe is connected to the 4" sanitary sewer below the basement floor. There is also a 2" vent pipe that is connected to the kitchen waste...
Leaking washing machine water supply shut off valve
[ 8 Answers ]
How do you repair a water supply valve that is leaking. It is the valve that connects the water supply to my washing machine. The leak occurs when I shift the lever from off to on and vice versa.
How do I access the switch for washing machine?
[ 4 Answers ]
I have a Whirlpool high capacity top loading washing machine and I need to replace the switch that is triggered by the closed lid so that the spin cycle can start. I have the switch. I see how it works. I have mounted it in the lid frame. I need to connect the wiring. I turned the... View more questions Search
|