 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Trane XL80 2 stage wiring to Honeywell Pro2000 tstat
Could someone tell me how to wire these together?
I have an Trane XL80 2 stage & heat pump with a wiring terminal labeled: W2 W1 R G B/C Y BK/TWIN The Honeywell Pro2000 thermostat (TH2210D) is a 2H1C model with terminals labeled: R C Y G O/B Aux/E The Honeywell TH2210D manual also shows: Y - compressor G - fan O/B - reversing valve Aux/E - auxiliary heat |
||||
Check out some similar questions!
Hello everyone, I have a problem with figuring out the wiring from a Trane XL80 2-stage furnace/ac unit to a Hunter Programmable Thermostat model 44155C. The existing thermostat is an old mercury based thermostat. It has the following terminals: G1 - green wire Y1 - yellow wire W1 - white...
I just changed out my thermostat from an old mercury thermostat to a Honeywell 3100 which is supposed to work with a heat pump. After I hooked it up the first time it would only heat my house in Em Heat mode. In my attempt to get the thermostat to work in normal heat mode I "fixed it" to where...
Hi, I have Honeywell TH8320 thermostat which I'm trying to connect to Trane XL80. My problem is that it's 2H/1C system with no heat pump but all TH8320 wiring diagrams only show either 2H/2C or 1H/1C. So I got a bit confused. I'd appreciate any help. Thanks!
I want to replace my Trane Weathertron tstat with a Honeywell RTH7400 prog one. I have a Trane heat pump with aux heat. I've been poring over these thread piece-mealing some info the follow is the result. The old wiring scheme: X2 - black O - orange G - green Y - yellow T - tan/brown R -...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
