 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Lincoln 20w elec furnace? High low power
Does any body know why there's a high low power on my furnace and if i place on high will it a lot more to run plus on the furnace there's a switch to turn just the fan on but its not connected to thermostat i have to go in bassment to switch manualy is there a way to move the switch many thanks adrian
|
||||
Check out some similar questions!
Burnham Series 2 Gas Boiler is not receiving elec power , but main line has power up to the unit
Was told to change ebp sensor front of engine, did not change a thing. Once engine warm up service engine light gose out. Now light stays on runs rough now told to replace temp sensor, was also told could be exhaust back pressure unit on the turbo?
Hi, I purchased 4 custom outdoor lantern fixtures for installation on top of rock wall columns in my front yard area. Each fixture was manufactured for 3 each 25 watt incandescent bulbs and has 18 awg wiring. I am under the assumption that these fixtures are made for a high voltage hook up. The...
I have a recently purchased Payne heat pump - model #'s PF4MN & PH3AN. The unit was installed in the summer and the cooling cycles worked fine. When we had the first chilly days in the fall I turned the heat on - it works fine but the heat seems to defer to the Aux Heat quite frequently. I called...
A hair dryer will not blow on high. It works when switched to low power. And when you plug it into a different outlet, it works fine on high and low. What's wrong with the first outlet?
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
