Ask Experts Questions for FREE Help !
Ask
    binky77's Avatar
    binky77 Posts: 3, Reputation: 1
    New Member
    		  
    #1

    Dec 9, 2010, 03:39 PM
    Gas furnace.. it will stop putting out heat, but the blower stays on..
    If we go out and check the furnace it says it is normal(the blinking) if we take out the fuse for about 15-20min it works fine for a couple of days and then starts the same stuff all over... could this be a sensor or the thermostat?
    T-Top's Avatar
    T-Top Posts: 1,871, Reputation: 100
    Ultra Member
    		  
    #2

    Dec 9, 2010, 07:26 PM
    A make and model of your system will help narrow down the problem.
    binky77's Avatar
    binky77 Posts: 3, Reputation: 1
    New Member
    		  
    #3

    Dec 10, 2010, 11:03 AM
    I went out and looked at it and this is what it says... American Standard By Trane Company Model # YCC024F1LOBE Hope this helps
    binky77's Avatar
    binky77 Posts: 3, Reputation: 1
    New Member
    		  
    #4

    Dec 10, 2010, 05:15 PM
    Comment on binky77's post
    We recently went out and checked the lights again and it was blinking 5 times... meaning flamed sensed with gas vavle off~ so what does this mean and how do we fix it? Please help :(
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Intertherm furnace blower stays on - no heat/cold air [ 4 Answers ]

Thanks for taking a moment to read - I've reviewed a lot of posts, however still cannot find one that explains why my Interthem G5RC100-16 gas furnace blower will not shut off even after the thermostat has been shut off. I'd also like some help, please, finding the "codes" for the blinking light...

Blower on furnace stays on. Ignitor does not come on. No heat. What could be wrong? [ 2 Answers ]

I have a 13 yr old Trane furnace. I have just replaced the thermal switch and flame sensor. The ignitor and flames no longer come on. The fan runs constantly with no heat. What could the problem be?

Furnace blower will not stop after flame goes out on gas furnace [ 1 Answers ]

Furnace blower will not stop after flame goes out on a gas furnace

Gas furnace not putting out enough heat [ 1 Answers ]

Gas furnace is not putting out enough heat when outside temp drops to the teens

Furnace Blower stays on, no heat [ 2 Answers ]

Hello, I have an older Bryant furnace model # 396gadd36075. I turned on the heat the other day and the no heat. I notice the unit had been turned off (pilot was not lit), apparently by the service company I use when they came to do the spring check for the AC. I followed the instructions to...

View more questions Search