 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
Check out some similar questions!
I have a miller M1M gas furnace. It will not ignite. The red led is flashing 2 times. It says the pressure switch is open. Does this mean the pressure switch needs replaced? Or is there something else wrong. How can you fix this problem? Thanks!!
Motor starts but miller furnace will not fire then motor shuts off
I replace a blower motor for a furnace that is about 30 years old... now it won't shut off.. the colors of the new motor are different the old motor... maybe I rewired wrong?? please help
I have a miller mobile home furnace about 11 years old... I have been having problems with it not "kicking" in no matter what I have the heat set at. Now it won't start at all. The error code is three red flashes. What does that mean?
On a call for heat the draft motor starts but the air proving switch does not close. I replaced it with the same result. Everything works normally if I close the switch manually with my own air pressure. Someone told me that somethimes the motor, due to age (this one is 13 years) will not spin fast...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
