Ask Experts Questions for FREE Help !
Ask
    bkone1's Avatar
    bkone1 Posts: 1, Reputation: 1
    New Member
     
    #1

    Dec 8, 2010, 09:37 AM
    Securing PEX tubing in wall
    I had a partial replumbing with PEX tubing that required knockout of a bathroom wall. When I brought in the wall guy to repair the wall, he said the plumbers had done a terrible job by not securing the PEX tubing and that I'd have to spend another $1000 to have it done the right way. Pictures of the wall are posted at http://www.flickr.com/photos/56841377@N06/?saved=1. Who is correct: the original plumber who left it as is, or the wall guy? Thanks.
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
     
    #2

    Dec 8, 2010, 01:15 PM

    He is correct, terrible job, he is also so over priced I am on the floor laughing. He wants to charge $1K to secure a job that problably never cost $1K to start with
    massplumber2008's Avatar
    massplumber2008 Posts: 12,832, Reputation: 1212
    Senior Plumbing Expert
     
    #3

    Dec 8, 2010, 03:54 PM

    Hi Bkone...

    Yeah, the plumber did a real poor job here. The pipes should be secured properly. The tub/shower valve and the tub spout and shower head should also be secured properly. Heck, I might actually suggest ripping all of this out simply based on the fact that the guy did such shoddy work, so how can you trust the PEX piping now?

    It should not cost you $1000.00 to simply secure the existing PEX... but good luck finding any plumber that will associate himself with that PEX work.

    It could cost $1000.00 or more to repipe all all this and secure everything properly especially if the next guy pulls a plumbing permit as is required for all jobs like this... meant to stop exactly this kind of stuff.

    Finally, if this plumber is really a plumber I would call him and tell him to fix this (although I probably wouldn't let him back in my house) or to refund your money or you will report him to the local plumbing inspector. He won't like that!

    That's my thoughts here...

    Mark

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Pex tubing [ 3 Answers ]

I am going to be cutting into my current pex tubing to run an additional hot and cold line to the bathroom I am putting in my basement. I have been looking at all the necessary components of accomplishing this and I'm a bit confused, is it necessary to use these rings or is there a fitting that can...

Pex tubing and uv light [ 1 Answers ]

I just installed my pex homeruns to a manifold in my utility room. Some of the pex lines run by large basement windows and my utility room has a small window. Here are my questions: 1. How important is it that the pex tubing is not exposed to uv light? 2. How long can it be exposed to uv...

Pex Tubing [ 2 Answers ]

What size Pex tubing is best for bathroom plumbing?

Pex tubing [ 1 Answers ]

I am running pex tubing in a bathroom I am building in my basement. Can the pex run flush with the 2x4's or do I need some kind of spacer so it is not laying flat on the wood? Also what kind of bends can the tubing stand?


View more questions Search