Check out some similar questions!
Lennox G26 Elite series furnace problems
[ 5 Answers ]
I have a G26 Elite Series Furnace. The inducer motor comes on as well as the flames for about 1 minute and the Blower Motor comes on for about one second and everything shuts down, flames too. It repeats the above cycle and then blower stays on and heats the house. I have cleaned the Flame sensor,...
Lennox furnace
[ 0 Answers ]
I have a lennox furnace that usually has an led light that will give codes by blinking,, the heat is not working the flame sensor is lighting but not gas even kicks on... can anyone help
Where is the relay for AC Fan located? Thr furnace is a Lennox Elite Series Model #
[ 1 Answers ]
The exhust fan on my forced air unit keep turning itself on and off. The furnace is a Lennox Elite Series Model Number VR8200 it has a Honeywell ignition control. I've turned the relay switch the fan continues to turns itself off and on periodacally. Please help thank you.
I have a lennox outside a/c unit and a lennox g26 series furnace.Low hum no air/ht
[ 4 Answers ]
Lennox Value Series... serial 5896G56798 M/N 10ACB365-5 P Central a/c unit and a Lennox G26 Series gas furnace both about 13 or 14 yrs old. Came home from vacation and turned A/C on (son tried earlier in the week) only a low hum whether on auto or fan or if we try heat(same thing, low hum)......
Lennox furnace, blower not working
[ 1 Answers ]
I have a 1000sqft town home with a Lennox furnace about 18 years old. My furnace blower is not working. I currently uneployed and job seeking and would like to avoid the cost of replacing the entire furnace. What sort of cost should I expect to replace the blower? View more questions Search
Add your answer here.
|