How attach boiler plate with boiler shell and how should be degree for welding plate

Check out some similar questions!

Is my hobart 600 a steam boiler or a hot water boiler. There is no circulator pump [ 0 Answers ]

I have a Hobart 600 automatic gas fired furnace. The first thing is I cannot see a circulater pump or a air tank. I can not tell if it is steam or hot water. When I go to fill the system with water, the system fills and then the water continues to flow out to the drain pipe.

What type of plate boundary is parallel to the direction of the plate movement? [ 4 Answers ]

What type of plate boundary is parallel to the direction of the plate movement?

I tried using a PAT and TAPCON screws to attach a bottom plate to the concrete floor [ 2 Answers ]

The PAT causes spalling for about a 1/4" and if it does go in will not hold. I tried using both 2 1/2" and 3" nails. The surface of the concrete seems brittle and the rest too hard. The nails will also bend in the concrete. The floor is about 5 years old. I tried using TAPCONS but they either...

Best way to attach wood top plate to ICF wall [ 0 Answers ]

Hello, I am the homeowner. ICF walls are poured with j-bolts spaced along the top horizontal edges. My 2x10 and 2x12 pressure treated top plates are stacked down on the slab. They used them as walk-boards during the pour. Walls are 9" reward wall and some 11" reward wall. I have several...

Decorative Swith Plate or Wall Plate and Switches [ 5 Answers ]

We're looking to replace our standard switch plates with "decorative" plates, mainly in the kitchen backsplash. We have seen plenty of options for the plates, from pewter to copper to nickel, etc. Are there options for the actual switches themselves? Can we get switches, such as simple light...

View more questions Search

Check out some similar questions!

Add your answer here.