Dryer back welded on? Do I access the heat element from the front?

Ask Experts Questions for FREE Help !

Browse

Ask

Answer

Search

Join/Login

▸ ▸ ▸ » Dryer back welded on? Do I access the heat element from the front?

BryanD8 Posts: 1, Reputation: 1

New Member

#1

Dec 7, 2010, 01:43 PM

Dryer back welded on? Do I access the heat element from the front?

My dryer is tumbling with no heat. Vent is clean, assume it's the coil.

Reply

Check out some similar questions!

Show me where the heat element is in a Maytag Performa dryer. [ 0 Answers ]

PDET910AYW

Kenmore Dryer No Heat/Element test [ 5 Answers ]

I have a Kenmore dryer, model# 110.63956 102 that stopped heating yesterday. There is an excellent troubleshooting guide included (hidden of course) and I think I have the problem diagnosed to the heating element. On the wall outlet and power cord connections to the machine I have 120vac on each...

Dryer won't Heat, Element gets hot [ 5 Answers ]

Ok 2 weeks ago the belt broke on my kenmore dryer. Ordered a new belt put it together and realized the door switch broke and fell apart. I put a new switch in and now I very little heat in the drum, but the element is glowing bright red. I can feel heat in the top of the drum, but the vents in the...

View more questions Search

Question Tools	Search this Question
Show Printable Version Email this Page	Search this Question: Advanced Search

Add your answer here.