Ask Experts Questions for FREE Help !
Ask
    MCWALKER's Avatar
    MCWALKER Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Dec 7, 2010, 11:38 AM
    Furnace will not lighht. Please tell what to do.
    massplumber2008's Avatar
    massplumber2008 Posts: 12,832, Reputation: 1212
    Senior Plumbing Expert
    		  
    #2

    Dec 7, 2010, 01:37 PM

    Have you tried to relight the pilot? If not, follow the instructions on the inner furnace door and relight the pilot. If the pilot goes out or fails to stay lit for very long then the thermocouple needs to be replced.

    Let us know more, OK?

    Mark
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

I have a lennox pulse 90 furnace gsr14q3-80 furnace and when I turn the air condition [ 2 Answers ]

I have a lennox pulse furnace model no. gsr14q3-80 and when I turn the air conditioner on, the furnace hums and the outside air condition unit fan runs but the blower on the furnace will not run.

York Stellar Furnace Heating up Furnace Room to 110 Degress? [ 2 Answers ]

I have a York Stellar Furnace in my newly purchased house. Furnace is 15 years old. Furnace is releasing hot air from front grills and heats up furnace room to 110 Degrees. I had a Bryant Furnace in another house and this never happened. All plenams and ducts are taped and sealed so the heat is...

Intertherm furnace e2eb-017hb runs briefly, shuts off, then furnace just clicks [ 3 Answers ]

I have an Intertherm furnace, e2eb-017hb. It comes on briefly, blows warm air, then shuts off, and a clicking sound comes from the coil contacts area. I have tested the t-stat, and also replaced a coil contact, thinking that was the problem. I would appreciate any help on what to do next.

Furnace not heating the house. Damper on the furnace not opening. Motor then shuts. [ 4 Answers ]

My forced-air furnace is not working correctly. The gas works heating the air in the furnace, but When the motor starts the damper doesn't open and the Motor shut down. I need suggestions?:mad:

View more questions Search