Ask Experts Questions for FREE Help !
Ask
    baxtersteve's Avatar
    baxtersteve Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Dec 3, 2010, 10:02 AM
    Heat pump thermostat compatibility
    I have a Bryant Heat pump model 213RNA036-A. I want to install a programmable thermostat. Will a Honeywell TH421001005 be compatible?
    T-Top's Avatar
    T-Top Posts: 1,871, Reputation: 100
    Ultra Member
    		  
    #2

    Dec 3, 2010, 05:43 PM
    Yes the Honeywell TH421 is a heatpump thermostat two stage heat one stage cooling it will work with this system.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Replacement of Carrier Heat Pump Thermostat with Honeywell TH6000 series thermostat. [ 4 Answers ]

I have a Carrier Series 50QT Electric heat pump that still uses the original non programmable thermostat. I am trying to replace it with Honeywell TH6000 series programmable thermostat. The wiring on the existing Thermostat as follows: O - White, I am thinking this is the Reversing Valve? Y...

Heat pump thermostat using Aux heat [ 6 Answers ]

I am aware of the adjustable differential setting which is basically a dead band that the room temp can swing through. I guess I am not explaining the situation clear enough. I am looking for a timing adjustment for the on time of the heat pump before the thermostat calls for Aux heat. Say 10...

Rudd ac with heat pump it works as ac but not on heat Thermostat ? [ 0 Answers ]

Could it be the wrong thermostat the unit model uqka a030jk the heat pump 7f62 heater kitrxqj

NO HEAT! Janitrol heat pump and AC system. Changing to Lux Thermostat. Wiring issue. [ 11 Answers ]

I have a Janitrol A/C and heat pump system. I replaced the thermostat with a Lux T9000LC The A/C works fine, but the heater does not. I have it wired as follows: G - Green Y - Yellow W - White RH - Pink B -

Heat pump thermostat Aux. Light is going on when no resistance heat used. [ 2 Answers ]

I have a Maple Chase SaverStat thermostat on a Lenox heat pump. The thermostat and heat pump are ten years old. Recently when the heat pump comes on the Aux. light on the thermostat also goes on (not the emergency heat light). I have checked and the auxiliary heat strips and they are not heating...

View more questions Search