Furnace only heats up manually

Check out some similar questions!

Wiring a furnace thermostat to manually operate the furnace fan [ 2 Answers ]

I have two wires connected to my furnace thermostat. There is a place labeled G on the thermostat. Can I simply run a wire from the G terminal on my thermostat to the terminal labeled G on my furnace fan relay to operate the fan separately?

Goodman furnace GMNT080-4 furnace runs good for a while then has to be manually reset [ 5 Answers ]

I have a Goodman GMNT080-4 (90%). I'm having the same problem As Streatherg did back in the Nov 2006 question. I reviewed his article and tried Every thing on there but seems to be doing the same thing. The furnace kicks on for about an hour then locks out and has to be manually reset threw...

How do I manually turnfan on for coleman presidential 2 electric furnace [ 1 Answers ]

Our Coleman Presidential 2 electric furnace's fan will not come on when the thermostat is clicked. I know the coils are working 'cause the furnace box get heated up. I've already tried flipping the breakers as well as letting the furnace cool off all the way before activating the thermostat and...

How do I start my furnace manually if my themastat will not turn it on? [ 2 Answers ]

I have a Goodman furnace that was installed in 2006 and was working fine until I changed out the thermastat to a programmable one, which is a Hunter model 44155C. I matched all the colors with the correct letters except the blue with I am not sure where that goes. The old thermastat was wired and...

Furnace blower must be switched on manually [ 1 Answers ]

Hi, I have a Williamson "Temp-o-matic" forced air oil furnace. I just recently purchased the house and when I went to change the thermostat it only had two wires wired to it (just a 2 conductor wire with no other wiring). When I connect those two wires together, the furnace comes on and...

View more questions Search

Check out some similar questions!

Add your answer here.