 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
Check out some similar questions!
I'm trying to make this old Magic Chef furnace work in my garage. I got it and the Fan Control Center was broken, laying inside unwired. I have no wiring diagram for this unit but the M# is G76-7502 C2-5. I need help wiring the fan control center and the fan limit switch to power. I bought a new...
Need to know which wires of the 5 go together. There are 3 from the relay( black; brown and red) the other 2 blackand the other wire white. Also, if possible send picture!! Mars - fan control center model # 24013
Hello, I need help!! I have a White-Rodgers/Steveco 90113 Fan Control Center with a SPDT relay. I need to know how to wire it, I have a thermostate with the red and green wires running to the fan control center, all I need to do is run a single stage fan on my Ducane furnace so the blower will...
I have a white rogers-steveco 90-113 fan control center and I would like to know how to wire it to my airco hot air furnace so I can use the blower for my outdoor wood boiler and also how to wire the thermostat to the fan control
Hi, I have an oil forced air furnace, with the fan controlled by a Honeywell L4064 fan limit control. The fan itself is capable of two speeds. I would like to add a fan control centre so that I can control the fan from a switch, hopefully able to select speeds. I gather adding a White-Rogers...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
