Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Lennox G20 gas furnace fails to start the fan
[ 6 Answers ]
My Lennox G20 gas furnace ignites the pilot light and starts the main burners. The burners burn normally for about 2 minutes and shut down without the blower fan starting. If I manually set the blower fan to run continuously, the heater cycles on heats the house to the temperature set on the...
Goodman Furnace blower (fan) does not start
[ 4 Answers ]
The furnace and blowers is little over a year old. It was reportedly making some screeching noise then stopped and it almost sounded like it attempts to start then it stops. I don't know where and what to look for start trouble shooting. Any help would be appreciated!
Electric furnace fan won't start in auto
[ 3 Answers ]
I don't know the model of the unit but it is electric and is at least 15 years old. It has a RiteTemp thermostat. In the auto mode the blower will not turn on, it makes noise, but won't go. If I turn it to the on position it blows cold air. If I switch it back to auto after a few minutes in on it...
Why does my gas-furnace not run? (fan-blower won't start)
[ 4 Answers ]
Hi Why does my gas-furnace not run? (fan-blower won't start) I could not see any blown fuses or circuit-breakers; power-switch is on; I ignited the pilot-light and turned the temp to 90 in thermostat - but fan-blower did not start at all, even after waiting for 10 min; I measured voltage at fan... View more questions Search
|