Ask Experts Questions for FREE Help !
Ask
    flerch's Avatar
    flerch Posts: 1, Reputation: 1
    New Member
     
    #1

    Nov 21, 2010, 07:50 AM
    GFI circuit breaker trips when flipped on.
    Recently installed a hot but. All wiring is correct, and has been rechecked. When the breaker is flipped beaker on, it immediately trips. My electrican says there is no direct short, however there is enough resistance to cause the breaker to trip. Looking for someone thoughts on what is causing this, and how to correct. Thank you for your assistance.
    Dr_Spa's Avatar
    Dr_Spa Posts: 101, Reputation: 13
    Junior Member
     
    #2

    Nov 27, 2010, 10:57 AM

    New or used hot tub?

    First guess would be the GFCI breaker is wired incorrectly (regardless of what the first electrician says... they're frequently WRONG).
    tkrussell's Avatar
    tkrussell Posts: 9,659, Reputation: 725
    Uber Member
     
    #3

    Nov 28, 2010, 06:15 AM

    First, get a new electrician, GFI devices do not trip because of resistance.

    Could be a defective GFI CB, could be wired wrong, and could be something in the tub to cause a ground fault.

    A good electrician that understands GFI devices and hot tubs should be able to troubleshoot this.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Which trips first a GFI or circuit breaker [ 1 Answers ]

I have an outside set of outlets all hooked up with GFI's. The last on the run is used for the small pond pump. It runs for about 3 days then throws the circuit breaker. If I hook the pond pump to my front yard outlet, it works forever. I didn't reset the last GFI and ran the pump off my second...

Bathroom GFI outlet trips breaker at breaker panel [ 2 Answers ]

Hello all. Our house is approximately 13 years old. Each morning when both the iron and blow dryer is plugged into two separate GFI outlets in the master bathroom, the circuit will trip the 15 amp breaker in the breaker panel. Is it possible to upgrade the breaker to a 20 amp without...

GFI Breaker Trips [ 1 Answers ]

Greetings all! I have a 15 amp GFI breaker that trips anytime something is plugged into any of the outlets on that circuit. I have used a circuit tester and it appears everything is normal but still when I plug anything at all into any of the outlets the breaker trips. What would cause...

New GFI Circuit Breaker trips [ 2 Answers ]

I just installed a GFI circuit from my breaker box and am faulting. I'm confident that I installed the breaker correctly with the breaker pigtail going to the power return bus and the black and white wires going to the correct terminals. If I operate the breaker without the earth grd connected it...


View more questions Search