 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
BDP DAY & NIGHT Furnace Model #394JAW036065 fan blows cold air, won't shut off
Trying to help my veteran father-in-law. The blower fan won't shut off unless you push the door switch. Blows cold air only, noticed sparks in what looks like a relay of sorts on the circuit board. Gas valve looks like it was recently replaced. Recently told it could be a high limit switch. Want to replace circuit board, but should I replace the Hi-Limit switch also. He lives 40 miles away, and I would like to help him out in just one trip. Any Ideas? I have found the parts online and will pay for them but would be thankful for any suggestions.
|
||||
Check out some similar questions!
Hi there. I have a problem that I haven't quite seen here and I have no idea how to search for it. Here's the deal: I have a gas furnace. I'm trying to save energy, so I got a new thermostat at the beginning of the fall. I set it to 68 when we're awake and in the house, and 60 after 10pm and...
Disconnected thermostat 3 months ago reconnected but cold air only now blows. When investigating I noticed the gas was shut off so I turned it on. Unit stiill blows cold only. Help?
I am hoping someone can help we have a Tempstar NUGK059 Gas Furnace - the pilot does not light and the furnace blower runs but only blows cold air. We thought it was the old thermostat - replaced the thermostat - double checked wiring. Same problem. Help it is -7 here in the Midwest. After...
First we replaced the thermostat. Then we replaced the ingiter. Still only blows cold air? Any one know what the problem is? :confused
Goodman GMP-075-3 gas furnace circa 1994 (induced draft, hot surface ignition, ca. 80% efficient, horizontally mounted in unheated attic, no A/C). Honeywell Magistat thermostat. The furnace worked fine for about 8 years, and still heats well and maintains the proper temperature. Starts with an...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
