Ask Experts Questions for FREE Help !
Ask
    Budper's Avatar
    Budper Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Nov 26, 2010, 09:24 PM
    Which way do I look at the motor
    How do I observe the motor for proper direction.Is there a universal method to visually look at the motor to determine correct rotarion.In othe words do I look as if I'm straddling the motor( like riding a horse) then record the counter/clockwise rotation? Do I stand back and face the coupling (output shaft), then make my determination? As you can see there are severaal ways a guy can make thyis mistake in determining the roration of an electric motor
    cdad's Avatar
    cdad Posts: 12,700, Reputation: 1438
    Internet Research Expert
    		  
    #2

    Nov 26, 2010, 09:29 PM

    I believe you would look directly at the output shaft of the motor to determine the direction of travel.
    Budper's Avatar
    Budper Posts: 2, Reputation: 1
    New Member
    		  
    #3

    Nov 26, 2010, 09:40 PM
    Comment on califdadof3's post
    Wow.. that was fast,I'm very new here and still trying how to respond... so you're suggesting that I stand directly in front of the motor (facing toward the outputshaft)...
    sathe1963's Avatar
    sathe1963 Posts: 97, Reputation: 4
    Junior Member
    		  
    #4

    Nov 26, 2010, 11:59 PM
    Dear All, Universally it is known / understood that whenever motor direction is to ve viewed; it has to be viewed from Non Driving End i.e. NDE side i.e. Cooling Fan side. (If R, Y, B or A, B, C of supply cables are connected to U, V, W terminals of motors; then motor is considered to be rotate in anti-clockwise direction when viewed from ND end of the motor) Regards.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

5hp briggs and stratton tiller motor need model # or replacement motor [ 3 Answers ]

I have an earthquake tiller model 5020 with a 5hp briggs and stratton motor that I need to replace but I can not find the model of the motor. Does anyone know which motor replaces that motor or do you know the model number of the motor that was used on that tiller?

Trane xv90 blower motor doesn't. Motor is free, unit is 7 years, not t-stat. Thanks [ 2 Answers ]

I believe I have troubleshot this down to either the blower motor or their Integrated Controller board. 120VAC to motor OK but too many other wires from board to motor for motor control to test (variable speed) without advice or a manual. Motor is rated for 100% duty cycle and has only been run...

Need to replace a Emerson air condition condenser motor, where to buy the motor? [ 4 Answers ]

Need to replace a Emerson air condition condenser motor, need to now where to buy the motor? 208-230 volt, 1.8 amp, 1140 rpm,Model K55HXTAH5826, Frame 48Y. Air condition unit Model # PGAD47DIH5. Wayne.

Goodman furnace will ?heat motor? And blower motor will run but not at same time [ 2 Answers ]

I have a 2 year old Goodman, gas, no heat pump. There is a flashing LED that blinks once ever 4 seconds. Also, blower motor does not stay on always. We did smell something like an electrical burn. I'm guess my blower motor is fried?

Benefit of bldc motor compare with pmsm motor or blac motor [ 1 Answers ]

in the name of god hi every body what is benefit of brush less dc motor and brush less ac motor. And when we use bldc and when blac? What is different of them? I know that bldcs have trapezial emf and blacs have sin emf.

View more questions Search