 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Goodman forced air furnace GU100-3?
The pilot won't stay lit. When it calls for heat, sometimes it will runs its cycle for an hour, 2 hours, sometimes even a few days without going out. But when it does go out, it takes a lot to get it lit again. And sometimes it lights, we turn the heat on, it clicks, & then goes out again. We replaced the thermastat, the thermal couple, the filters & cleaned out all the vents. What is wrong?
|
||||
Check out some similar questions!
I have a question regard my goodman furnace on the "blink" (no pun intended). After discovering it to not be working properly I removed the front panel to find the blinking red light. It is blinking three times. I reviewed the troubleshooting guide to find 4 possibilities. I removed what I...
I have a goodman it won't turn on when the thermostat calls but if I go down and open the front and push the button it will run until it gets to 70 degrees shuts off but won't turn back on when the house gets cool.help.
I turned my furnace on for the first time this fall and it is not heating. The blower works And is blowing cold air. The furnace is a forced air furnace. I have lived in this townhouse for about two years and not sure what to do. Have called a couple people but everyone is really busy right...
I have a wood burning stove heating up my basement but the heat can't get to the upstairs because of the home design. I can't cut openings in the basement ceiling (upstairs floor) for the heat to just rise, so I am thinking about cutting a vent in the cold air return duct downstairs so I can just...
If thermostat is set to 70-90 degrees the furnace burner and blower will run constantly and the temp never gets above 68 degrees in the house. I have a Lux programmable thermostat and was thinking of replacing it with a Honeywell. I have a new filter. Any ideas? The weather has been in the...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
