 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Goodman Furnace issues
So I have a Goodman GMPN060-3 REV 3 furnace and it works fine for a while then I check it and the red status light starts to blink rapidly. It says it says to check the twinning and Polarity of the wires. I checked them a replaced the Thermostat and it worked for about a hour then shut off and started to do it again. Any ideas what it could be?
|
||||
Check out some similar questions!
I have a Goodman GMNT080-4 (90%). I'm having the same problem As Streatherg did back in the Nov 2006 question. I reviewed his article and tried Every thing on there but seems to be doing the same thing. The furnace kicks on for about an hour then locks out and has to be manually reset threw...
Our inside unit is cooling fine. It will run and blow air, then it sounds like it is cycling off and it will kick hard and keep running for another few minutes. Any ideas what to check?
Hi, I have a Goodman AE 24-08 interior blower unit for my heat pump. Recently the blower stopped turning on, while the outside unit would run. Checking in the panel, the motor was trying to kick over, but couldn't get started. If I turned the blower by hand, (to get it started), it would run...
I have a two year old high efficiency Goodman furnace that seems to have problems from time to time. The strange thing is that my son-in-law had his furnace installed about the same time and he has the same problem. We have our thermostat programmed for 62 during the night and at 6:00 am it goes...
I am replacing my 28 year old furnace with a Goodman furnace and an AC unit. Never had central air before. I have read conflicting reports on the quality of the Goodman line and wondering if I am making the right purchase. I am getting a 95% efficient, 90,000 BTU, 2 stage heating with a variable...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
