Ask Experts Questions for FREE Help !
Ask
    gw136's Avatar
    gw136 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Nov 23, 2010, 03:07 PM
    Does anyone know where the computer ground on a 97 wrangler is?
    I have a 97 jeep wrangler with 70 thousand miles on it my wife took it shopping and it wouldn't start when she came back out .
    So I replaced the pump and fuel regulator then I replaced the assembly then the cap roter wires plugs all the relays the coil then the distributor all the fuses then the computer . Now I am thinking it's the ground for the computer I haven't gotten a code yet from either computers
    ma0641's Avatar
    ma0641 Posts: 15,675, Reputation: 1012
    Uber Member
    		  
    #2

    Nov 23, 2010, 04:05 PM
    Does it crank? Check all the fuses? I have seen similar problems with Jeep models and dirt and junk getting in the shift lever assy. The switch does not close and it won't start.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Wrangler transmission noise [ 1 Answers ]

I have a 94 wrangler automatic with 4.0 it makes a rubbing noise and will not pull it's self any ideas?

2004 jeep wrangler [ 2 Answers ]

This has happened a couple of times now. I go to start the jeep and it does start but it will stall. I start it again and it starts with a little hesitation and if I do not keep my foot on the gas pedel it will stall. Drive it for a couple of minutes, with one foot on the gas and if I have to stop...

View more questions Search