Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Add on furnace (wood burning)
[ 1 Answers ]
Help Situation: We have a 1906 home in North Central Nebraska; two-story, wood frame with cedar siding and plaster/lath walls. The house has 3,240 sq ft on the first and second floor (basement is 1,600). We have an older electric furnace (twenty-five years old, give or take) with a belt...
Add on coal/wood furnace thermostat wiring for 2 zone house with oil furnace
[ 1 Answers ]
I purchased a Harman wood / coal furnace model SF-2500 (forced hot air system) and am tying into my existing forced hot air oil furnace 2 zone system and do not know how to tie into the existing thermostats and zones. I wish to still use the 2 separate zones for the bedrooms and the main body of...
Wood burning furnace questions
[ 5 Answers ]
We one of these in our basement right next to our regular furnace: Clayton Wood Burning Furnace Models 7.1 V + 5.6 V Voltage Rating: 120V AC 60HZ Serial - WH1 - 843175 Class "A" All Fuel Chimney 6" I.D. Flue We bought the house this past winter and are now looking at finishing the...
Wood burning furnace
[ 1 Answers ]
I have a wood burning furnace that has a problem burning out the motor because of sand. I there a sealed blower motor that can be put on a Harman 100 wood pellet burning furnace? I am told by the contractor that there is no such thing
Clayton wood burning furnace
[ 0 Answers ]
Iam wanting to sell my clayton wood burning furnace. Model 7.1v 5.6v and has a water heating packet of copper pipe that returns to a water heater. What are the btu's of this unit and about what should it be worth. View more questions Search
|