Ask Experts Questions for FREE Help !
Ask
    PET41's Avatar
    PET41 Posts: 23, Reputation: 1
    New Member
    		  
    #1

    Nov 5, 2010, 04:34 PM
    Adhesive for 1/16 fiber glass to plywood in cool weather?
    Want to adhere 1/16" fiber glass to plywood (1/4"-3/8"). Most adhesives do not work in cool weather. Any help you can provide will be greatly appreciated.

    Pet41
    creahands's Avatar
    creahands Posts: 2,854, Reputation: 195
    Ultra Member
    		  
    #2

    Nov 21, 2010, 10:13 PM

    Check at big box store for spray adhesive. Read directions for operating temperatures.

    Chuck
    PET41's Avatar
    PET41 Posts: 23, Reputation: 1
    New Member
    		  
    #3

    Nov 22, 2010, 07:17 AM
    Quote Originally Posted by creahands View Post
    Check at big box store for spray adhesive. Read directions for operating temperatures.

    Chuck
    Thanks Chuck, I looked into that, 3M makes an adhesive but I missed the right temperature by about two weeks. I ended up using "Liquid Nails" #310 adhesive which has a minimum temperature of 50 degrees. It worked quite well. Thanks again.
    Pet41
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Do you put plastic down first before the mortar for a fiber glass shower pan? [ 1 Answers ]

I have a 36 inch by 36 inch shower pan to install. The partical board under the old shower looks pretty bad. There was a lot of water damage to the whole tbathroom. After installing a new exhaust fan I am confident that will help greatly. I am going to tile the walls of the shower. Now my question...

Installing fiber glass corner shower unit [ 2 Answers ]

Hello I have been reading your questions and answers regarding installation of fiberglass base shower units and have one more regarding the drain. I have removed the cement floor to install a 2" trap and have purchased a Aqua dynamic 2" shower drain, my question is once I have positioned my trap...

How to paint a outside fiber-glass door? [ 4 Answers ]

We have a outside fiber-glass door and painted with Gel Stain brought from Home Depot. But, the Gel has been peeled off after the summer. Any advice?

Fiber glass tub installation? [ 1 Answers ]

How do I cut the hole in the fiber glass for the handle and shower? I was think of a jigsaw with a fine metal blade NO??? LOL Thanks Dan

Fiber Glass shower drain [ 3 Answers ]

My drain broke without me knowing. The strainer was still attached to the shower floor with some surrounding caulk. Water has been running in and around drain pipe creating a lot of moisture underneath the shower floor. Also, a strong lingering odor, I'm assuming from moisture and mold has...

View more questions Search