Ask Experts Questions for FREE Help !
Ask
    unbreakablej's Avatar
    unbreakablej Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Nov 20, 2010, 06:32 PM
    Old moen shower knob removal...
    I have a moen shower control that drip leaks when off. It's a pull knob for on/off, rotate for hot/cold. Its an all chrome unit. I need to get into the wall, but I cannot figure out how to get the knob off. There is no set screw, and I've firmly messed with it, but cannot figure it out... any help out there?.
    speedball1's Avatar
    speedball1 Posts: 29,301, Reputation: 1939
    Eternal Plumber
    		  
    #2

    Nov 21, 2010, 08:04 AM
    Quote Originally Posted by ;
    i cannot figure out how to get the knob off.
    The insert on the knob pops off, (see image) and you unscrew the screw,
    Shut the water off and open up the valve and replace the cartridge, Clicking on;http://www.moen.com/consumersupport/...3/moen0133.cfm
    Will get you to a installation guide for replacing a Moen cartridge. You can get a new cartridge from Moen for free call them at 800-289-6636, While you have the valve open turn the water back on for a moment to flush out the supplies. Rerassemble and test. Good luck, Tom
    Attached Images
     
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

No hot water in shower - Moen single lever knob [ 14 Answers ]

I did a lot of reading before posting this, but still found myself stuck. I have a single lever valve in my shower. It is in a newly built house (less than two years old). I removed the single screw on the tip of the valve, removed the two that are on the 6" diameter round chrome plate that lies...

Moen shower knob [ 1 Answers ]

How do I remover the plastic handle to look inside? There is cold water but no hot water

Moen shower knob spins [ 5 Answers ]

Single knob moen shower spins without any change in water. The screw inside the knob cap can control the flow of water with a screwdriver but will not unscrew to remove the knob. The knob has no affect on water and just spins. Any input on how to resolve this. Thanks

Shower Knob Removal [ 2 Answers ]

I've replaced faucet washers before but never in this house (2.5 yrs in this old house). The knobs in the shower are hot and cold with the faucet in the middle for the batch. The knobs are mounted to the wall which is tiled. I removed the cap and unscrewed the screw in the middle of the knob, but...

View more questions Search