Ask Experts Questions for FREE Help !
Ask
    arcdplusc's Avatar
    arcdplusc Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Nov 20, 2010, 11:05 AM
    York Furnace will not ignite
    When the stat is activated, York Stellar Plus furnace fan turns on but does not ignite. Fan will remain on until I manually turn the stat to OFF. Please help.
    Joshdta's Avatar
    Joshdta Posts: 2,549, Reputation: 45
    Ultra Member
    		  
    #2

    Nov 20, 2010, 08:12 PM

    Look in bottom door of furnace for fault code.
    arcdplusc's Avatar
    arcdplusc Posts: 2, Reputation: 1
    New Member
    		  
    #3

    Nov 21, 2010, 06:08 AM
    Comment on Joshdta's post
    Josh
    Thank you for responding, but I do not see where there would be a fault code. Please advise.
    Joshdta's Avatar
    Joshdta Posts: 2,549, Reputation: 45
    Ultra Member
    		  
    #4

    Nov 21, 2010, 08:06 AM

    There should be a sight glass in the bottom door of the furnace.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

York Furnace Flashes 7 Times will not ignite every time [ 3 Answers ]

I have a York furnace, the last couple weeks I have been waking up to a 65 degree house when it should be 70, the thermostat says it should be on, but no squirells turning. I look at the board and it is flashing 7 times, which is ignition lockout, what is causeing this?

My Furnace Won't Ignite [ 2 Answers ]

I have a 1980 propane furnace. The pilot light will light. And the heat will kick on after the lighting. But after the furnace gets to the desired teperature the first time, the pilot light goes off and i have to start the process all over again. How do i keep the pilot lit and thereby keep the...

York burners won't ignite mod P3HU 9 yrs. Old [ 3 Answers ]

When t-stat calls for heat the combustion blower starts, the glow plug glows but gas valve doesn't open and burn doesn't ignite. The combustion blower continues to run. Is this a problem with the pressure switch? Does it need to be replaced? :confused:

Furnace will not ignite [ 2 Answers ]

I have a goodman furnace modle# gupi100-4 the problem that I am having is when you turn the furnace on the induce draft motor come on the ignition comes on for a couple seconds and goes off and it keeps going on and off and never lights the furnace.I have replaced the draft motor,pressure switch...

Furnace will not ignite [ 3 Answers ]

I have a Trane XE 60 Furnace and the thermostat sends the signal to ignite but burners do not ignite. What may be wrong? This just happened yesterday.

View more questions Search