Ask Experts Questions for FREE Help !
Ask
    wills_81's Avatar
    wills_81 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Nov 20, 2010, 03:26 AM
    Fan and furnace interlock?
    How do I interlock the bath fan switch with the ventilation switch (located in hallway)
    ma0641's Avatar
    ma0641 Posts: 15,675, Reputation: 1012
    Uber Member
    		  
    #2

    Nov 20, 2010, 05:45 PM
    Your question asks "fan and furnace" but your comment says "fan and ventilation switch". Please give us a little more detail about what you want to do. Interlocks usually block one switch when the other is engaged. Are you trying to get both to run together or only one run at a time?
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Wiring a furnace thermostat to manually operate the furnace fan [ 2 Answers ]

I have two wires connected to my furnace thermostat. There is a place labeled G on the thermostat. Can I simply run a wire from the G terminal on my thermostat to the terminal labeled G on my furnace fan relay to operate the fan separately?

Furnace ignites but fan won't come on. Burner stays lit making furnace HOT. [ 3 Answers ]

Rheem criterion furnace fan will not work in the fan on position [ 1 Answers ]

I have a Rheem criterion gas furnace which works great ac/heat but I want to use the fan only without the ac/heat and the fan will not run in the on position but does run with the ac or heat on, any suggestion's... I put in a new thermostat and it is installed properly ( honeywell) I called the...

Wiring inline duct fan to furnace fan goodman gmp100-4 [ 2 Answers ]

How do I wire my inline duct fan to my Goodman model gmp100-4 gas furnace fan so that the inline duct fan comes on and off when the furnace fan does? I understand that I need a relay from the inline duct fan but don't know where to connect the relay to the furnace.

Comfortmaker Furnace Fan blows in line fuse and will not allow furnace to work [ 1 Answers ]

I have a Comfortmaker Furnace (approximately 1998/99) and the fan will not turn on allow the furnace to heat. When I try to turn the furnace on it blows a 3 amp fuse at the blower motor. I removed the fuse and jumped it and all it will do is make a faint buzzing noise and not turn on. I can...

View more questions Search