 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Can one use foam instead of mud when replacing a tub?
I am trying to confirm the following: I was told that I could use foam as my base instead of mud under my tub replacement. I asked the guys at my local Home Depot if this was doable and got both yes and no responses. I am thinking that foam would be much easier to work with but looking for the best solution.
Anyone have comments or suggestions here? |
||||
|
||||
|
Hi BIMC... Yeah... getting some mixed messages, huh? The fact is that foam compresses over time and will eventually lead to a softening of the tub floor over time. Foam can not only compress, but when installed improperly for these applications can actually expand and crack the tub floor, so basically the stuff is pure evil and should be avoided altogether. Opt. for STRUCTOLITE (if you can find it) as it is super light weight and dries rock hard overnight. Otherwise, mortar will work fine, too! Finally, double check what the manufacturer of the tub requires...some require that you use NO bedding substrate at all! Mark |
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
Trying to wrap up a small facelift on my master bathroom and am to the point of replacing the faucet on the roman tub and the control levers on the shower. I believe the current tub faucet and shower controlers are from Delta and are 18 years old. All I want to do is update the exterior parts...
Is it safe to use polyurethane foam and an elastomeric latex coating only as hot tub cover? I made this cover and it works great, Im just afraid of contimenation from the checmicals, dichloride and the hot water that it covers for hours at a time until I use it? I tried covering it with fabric, but...
I'm thinking of replacing an old tub (american standard recessed tub) with a new claw foot tub. The only part I think I may have trouble with is connecting the drain. I don't think the drain line in the floor will be where it needs to be for the new tub. I am on a slab and wonder how they set...
My house is approx 60 years old and has plaster walls throughout. I'd like to replace the existing tub surround (not the tub) because it is bubbling out... If you lean on it you fall into the wall. It was that way when I bought the house 3 years ago. Does anyone have any advice on where to...
I have a slip-on spout where the diverter does not work anymore. It must either stay "up" for the shower or "down" for the tub. The diverter is on the spout. I removed the spout and took it to a hardware store to purchase a new one. I followed the instructions and installed the new spout. I...
View more questions Search
|
