Not your question?
Ask your question
View similar questions
Check out some similar questions!
NO HEAT! Janitrol heat pump and AC system. Changing to Lux Thermostat. Wiring issue.
[ 11 Answers ]
I have a Janitrol A/C and heat pump system. I replaced the thermostat with a Lux T9000LC The A/C works fine, but the heater does not. I have it wired as follows: G - Green Y - Yellow W - White RH - Pink B -
Electric Heat-Pump-No heat
[ 2 Answers ]
I had a wall-mounted unit installed in a room in may of this summer. In the middle of the night the heat shut off and has not come back on since. It is an Amana, electric heat with heat pump unit. The cooling works, the heating setting does not blow air at all. When I remove the cover it says...
Changing from gas heat to electric heat
[ 3 Answers ]
How do you change from Apollo gas heating system to electric heating system?
Electric heat pump auxilery heat problem
[ 4 Answers ]
Equipment: Trane XL1400 4 years old Auxilery heat: Strips... 2 -60Amp circuits Filters changed every 30 days I cleaned outdoor unit summer 2006, as every year. Thermostat: Honeywell Chromotherm II Problem: I have been noticing at times the aux heat kicking in at times I think it should not....
Emergency Heat vs Auxiliary Heat
[ 1 Answers ]
Why is my thermostat saying the Emergency Heat is on rather than the auxiliary heat and what do I do to correct the problem?:confused: View more questions Search
|