Ask Experts Questions for FREE Help !
Ask
    firetender1's Avatar
    firetender1 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Nov 16, 2010, 10:43 AM
    RHEEM furnace standing pilot system
    HI, I have a Rheem furnace that when it ignites the blower motor starts immediately, there is no delay allowing the heat exchanger to heat up before it kicks on. I've also noticed that the pilot goes out periodically, I believe the blower motor is pushing so much air that it blows it out. I've replaced the thermocoupler to ensure it wasn't the culprit. Thank you for looking

Check out some similar questions!

Rheem Classic 90 plus furnace - how to light the pilot? [ 1 Answers ]

Upstairs furnace is working fine. Downstairs furnace the LED on PCB are not lit. How do I lite the pilot?

Standing pilot [ 1 Answers ]

I have a problem with my pilot to stay on.I cleaned the orfice and installed new thermocouple.and still don't stay on.it a comort aire furnace.just wondering if the gas valve needs to be replaced.thank for Comments.

Old lennox with standing pilot and cam stat cycling [ 8 Answers ]

Hi gents Old lennox model 9803-980-2 H.boy 68000 BTU with a honeywell fan limit cycling every 5minutes . The wires disconnected at the Stat and jumpered . Still the furnace acting same problem . The motor and blower wheel and pilot acting quite normal . Do you think the fan limit is faulty...

Pilot light in rheem power vent [ 1 Answers ]

How do you light the pilot light in a rheem power vent 2?

Gas furnace has an intermittent pilot, pilot lights, furnace tries to start [ 3 Answers ]

Have a 25 plus year old furnace pilot will start when signal sent furnace tries to start makes noise as it tries over and over but will not start. Thanks

View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.