Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Raising toilet
[ 6 Answers ]
We are in the process of changing our bathroom flooring in the basement. They originally had carpet in it, and a leak in the shower proved how bad of an idea that was. Anyway, for a basement subfloor, we put in Dricore and then plywood on top of it, and will proceed to lay down 12" vinyl tiles on...
Raising Toilet
[ 1 Answers ]
I had a toilet flood and when I removed the flooring (carpet) the floor was rotten. I have removed the plywood. I need to replace the plywood and we now want to install tile. Do I cut out the old flange and raise it to the level of the tile or should the flange be below the tile?
Raising Grade Above Sill Plate
[ 4 Answers ]
I am in a wheelchair and building a new home. I would like to raise the grade above my sill plate and ribbon board to help level out my lot. What can I put on the sill plate and ribbon board to protect it from rotting out since it would be in contact with the ground?
Move toilet 3 feet over concrete slab, building platform
[ 6 Answers ]
I know there have been many other posts about moving toilets, which have been quite helpful, but I'm posting this to get additional info for my particular project. The renovation is for a 60"x90" bathroom that currently has an unnecessarily large vanity and the toilet as a focal point. See...
Washing Machine below sewer grade?
[ 3 Answers ]
I am wanting to move my washing machine down stairs, but the main sewer lines are all above. The lowest point is just 2' below the upper floor and about 50' total away. I'm on a slab so I can't run pipes to my craw space. I have done some research and found a system that would work by Saniflo... View more questions Search
|