 |
|
|
 |
New Member
|
|
Nov 14, 2010, 10:50 PM
|
|
Bathtub Stopper's brass broken
I was trying to open the stopper with wrench but it broke the brass inside it. Stopper was of another kind which has screw underneath and I rotate it with force which let to brake it.
The remaining part of the brass object is stuck inside.
What does the brass object called ? How should I change it
Please see the pictures for Detail
http://picasaweb.google.com/inderpre...eat=directlink
|
|
 |
Senior Plumbing Expert
|
|
Nov 15, 2010, 04:30 AM
|
|
Hi Ipskang...
You should just need to purchase TUB DRAIN REMOVAL TOOL (called a dumbbell wrench) and a new TOE TOUCH strainer replacement... see images. You'll also want to pick up some plumber's putty and some pipe dope.
Stick the tool into the drain so it engages the cross members of the strainer and twist counterclockwise to remove. Most likely, you'll need a pair of pliers to turn the tool. Once the unit is out it should be as easy as putting some putty around the lip of the new strainer replacement, putting pipe dope on the threads and then screwing the replacement strainer into the tub waste assembly. The black rubber washer supplied with the replacement goes underneath the tub (bend and put through the hole in tub)
You could also try to use two large flat screwdrivers in place of the tub drain removal tool... just insert into the cross members and cross the screwdrivers across each other to spin the old strainer out... works most of the time... ;)
Questions? Let me know...
Mark
|
|
 |
Eternal Plumber
|
|
Nov 15, 2010, 04:41 AM
|
|
Here's a few more tub wrenches, (see image). Good luck, Tom
|
|
 |
New Member
|
|
Nov 15, 2010, 08:23 AM
|
|
Thanks Mark & Tom for answering the question.
Mark, I think I have the Push/Pull Stopper . Firstly pull the stopper up, rotate the whole thing so should I purchase Toe Push stopper.
The Strainer image( Second) looks like the stopper but not the strainer which I will pulled from my bathtub ( First image in my link)
Does Toe Stopper consists of Stopper, inside brass and the Strainer?
All the objects in my images link are waste ?
http://picasaweb.google.com/inderpre...eat=directlink .
Am I Correct?
Thanks in Advance
Ipskang
|
|
 |
Senior Plumbing Expert
|
|
Nov 15, 2010, 10:01 AM
|
|
The pics. Didn't show up at your link Ipskang...
However, you can use a toe stopper or a twist and spin type like you had... either one works fine and both swap out the same way... :)
|
|
 |
New Member
|
|
Nov 15, 2010, 10:07 AM
|
|
Mark,
Sorry for the wrong link. Please find the pics http://picasaweb.google.com/inderpre...eat=directlink
Do I have to purchase the strainer ( Image 1 in the link) and brass object also?
Or
Does the Twist and turn stopper will include the strainer and the brass object which is broken ?
Thanks
Ipskang
|
|
 |
Senior Plumbing Expert
|
|
Nov 15, 2010, 10:25 AM
|
|
I saw those pics. At the first post so all is good!
The strainer replacements come as a kit exactly as below... only in packages. The kit will include everything but the plumber's putty and the pipe dope.
Remember, the black washer goes under the tub (bend and squeeze through tub hole), putty under the lip of the new strainer and pipe dope on the threads. Be sure to remove the old rubber washer under the tub, too... OK?
Mark
|
|
 |
New Member
|
|
Nov 15, 2010, 10:36 AM
|
|
That's good! If everything includes in the kit. I will buy from the hardware store today.
Images in your last message doesn't contain image of strainer ( Image 1 in my link) which I will remove from the bathtub using tube drain removal tool or
Flat screw drivers.
Will it include that part also?
Thanks
IpsKang
|
|
 |
Senior Plumbing Expert
|
|
Nov 15, 2010, 12:59 PM
|
|
The cross member is a part of the strainer assembly... comes built into each drain.
Remember your:
Tub drain removal tool (or screwdrivers)
Lift and twist drain replacement kit
Putty
Pipe dope
Good luck!
|
|
 |
New Member
|
|
Nov 16, 2010, 10:18 PM
|
|
Mark ,
I couldn't find the Lift & lock bathtub drain at Home Hardware yesterday. Today I found it at Canadian Tire. It has everything. I have few questions before I remove the old drain from the bathtub
1. Do I need thread also?
2. Can I use the open old drain as shown in Images ?
http://picasaweb.google.com/inderpreetkang/BathtubStopper?feat=directlink
Thanks
Ipskang
|
|
 |
Senior Plumbing Expert
|
|
Nov 17, 2010, 05:06 AM
|
|
Thread... what kind of thread? Sewing thread? No thread needed here.
When you remove the old strainer you should only be left with the tub shoe UNDER the tub.
Remove the strainer and the rest should be obvious.
Note here, that I noticed some silicone under the lip of the old strainer... I'm thinking you will need those screwdrivers I mentioned earlier to get enough leverage to unscrew the old strainer, OK?
Good luck!
Mark
|
|
Question Tools |
Search this Question |
|
|
Add your answer here.
Check out some similar questions!
Bathtub drain stopper broken
[ 1 Answers ]
My tub won't drain and when I took apart the stopper assembly, the linkage and plunger came out. When I pulled it, it started to drain but stopped immideatly. What do I do?
Bathtub drain stopper broken
[ 1 Answers ]
My stopper cylinder broke of from the linkage so when I remove the stopper all I get is the cover and the first part of the linkage without the cylinder. What should I do ?
Bathtub drain broken under slab - HELP!
[ 5 Answers ]
I have a 1975 single level home built on a flat slab with NO crawl space. The tub drain has apparently broken and when the tub drains you can hear it hitting the fill dirt below. The walls are tiled.
Unknowingly this has been going on for sometime now and the house has settled on one end w/...
View more questions
Search
|