Ask Experts Questions for FREE Help !
Ask
    jjmhi's Avatar
    jjmhi Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Nov 14, 2010, 06:04 AM
    Add zone to heating
    How much wood it cost to add a 3rd zone to my heating system,hot water baseboard w/ circulator pumps. Room is on first floor.

Check out some similar questions!

Second zone not heating properly [ 3 Answers ]

I have forced hot water and had a second zone added when I built an addition about 25 years ago. I just turned the heat on but the heat isn't getting to the addition. I've checked the circulating pump and it is on but I noticed that the pipe on one side of the taco 219 swetcheck is hot while its...

Zone heating. One zone won't turn furnace on. [ 3 Answers ]

Hi All, I am using two Honeywell V8043E1012 motorized valves. One zone works but the other one you hear the thermostat click on when you raise the temp but the furnace does not come on. When I use the lower floor thermostat the furnace turns and I get heat upstairs. Is this the problem of the...

Heating Zone not working [ 4 Answers ]

It's heating season again and I have a 6 zone hot water heating system and one zone is not working suddenly. It was working fine the other day and today the zone pump will not go on. The thermostat appears to be working fine as it is calling for heat. Is there a procedure that I can follow to...

Dual Zone Heating [ 2 Answers ]

I have forced hot air dual zone heating at my home. When I set the temperature at 70 in the first floor.. The fan is also blowing in my 2nd floor and the temperature increases in the 2nd floor to 70. Where as the thermostat in the second floor is set to 62. I looked at the furnace and saw a...

View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.