Check out some similar questions!
How do you wire a single switch (1 black 1 white 1 ground) to a 5 wire hunter remote?
[ 1 Answers ]
I have an existing ceiling fan operated off a single switch (1-black, 1-white, and ground). I am trying to install a hunter ceiling fan remote (model 27157) with 5 wires (1-black/white, 1-red, 1 black, and 2-white commons). I have tried several combinations of wiring, including the recommended...
I'm replacing an old 2 wire thermostat with a Hunter (#44155C). Wire placement?
[ 3 Answers ]
I'm not sure of the wire placement. I have a black and white wire attached to my old thermostat. The new thermostat has attachments labeled G, RC, Rh, Y/O, W/B, Y1. There is a jumper connecting RC and RH. Do I connect the black wire to RH and the white wire to W/B? Any help would be greatly...
Did I short my thermo wiring by connecting the C wire when I was not supposed to?
[ 6 Answers ]
I am trying to hookup a Honeywell programmable RTH6300B and I took jumper out of the R and Rc and hooked the red to R and the old C to the Rc. Now I can not get anything to work. I do not even get a read from my pocket tester from red. Did I really screw something up? How do I fix it if I...
Switching 2 wire to 4 wire for new programmable thermo
[ 6 Answers ]
I am hoping this is a simple question. I am trying to hook up 3 programmable thermostats for my oil furnace that has 3 heat zones - (forced water system). I bought a thermostat for each zone or heat pump. Each heat pump has a two wire set up with a red and a white/yellow wire. When I was at...
40 yr old Carrier Weathermaker thermo to Hunter 44110 programmable
[ 3 Answers ]
40 yr old Carrier Weathermaker thermo to Hunter 44110 programmable -------------------------------------------------------------------------------- Carrier is a 9 wire 40 yr old round thermostat. I had a programmable years ago and just matched the color code, didn't like it and took it off.... View more questions Search
Add your answer here.
|