Where can I get a gas valve handle to replace my brocken one made of plastic

mrpepper Posts: 1, Reputation: 1

New Member

Nov 12, 2010, 06:06 AM

Where can I get a gas valve handle to replace my brocken one made of plastic

ma0641 Posts: 15,675, Reputation: 1012

Uber Member

Nov 12, 2010, 03:31 PM

Go to an HVAC service company in your area. They usually have old units out back waiting to be scrapped and would most likely let you pull one off.

Add your answer here.

Check out some similar questions!

How would you replace the coils in the gas valve? [ 0 Answers ]

How would you replace the coils in the gas valve? It is pointing to the gas valve as of now since the glow plug turns on but no flames.

Can I replace gas valve with universal valve? [ 3 Answers ]

I have an older Carrier natural gas furnace (1970s). Pilot doesn't stay lit. New thermocouple didn't help. Repair man says I need a new gas valve, $700 plus install, suggests replace entire furnace. Can I replace valve with universal valve and save $$?

Replace toilet shut-off valve handle [ 2 Answers ]

The handle broke on the shut-off valve that services my dishwasher. The valve is soldered in-line, and in good condition - the pot metal handle cracked so that only the center cog remains. It is an odd configuration because the shaft has approx. 16-18 points on it. No replacement handle in the...

Parts to a shower handle, mine keeps breaking Made of plastic) [ 2 Answers ]

My shower handle keeps breaking, (plastic) am I installing it correctly or am I missing A part, that prevents it from cracking. (the part that keeps cracking is the cilindrical part that screws on to the stem of the shower. (single faucet).

Should I replace my gas valve? [ 1 Answers ]

My Trane XV-90 is not heating on its own. When a thermostat calls for heat it goes through the following cycle: Combustion Blower Starts Igniter starts to glow I hear a click The igniter turns off after about 15 to 20 seconds The Combustion Blower Stops The Combustion Blower Starts The...