Ask Experts Questions for FREE Help !
Ask
    mjsalmonjr's Avatar
    mjsalmonjr Posts: 5, Reputation: 1
    New Member
    		  
    #1

    Nov 12, 2010, 01:22 PM
    How to install a new bath tub
    smoothy's Avatar
    smoothy Posts: 25,490, Reputation: 2853
    Uber Member
    		  
    #2

    Nov 12, 2010, 01:26 PM

    You can either do it the right way or the wrong way.

    The wrong way is the easy way.


    The right way depends on the type of tub and materials its made from... has to have the correct slope so water doesn't drain onto the floor from the sides, and has to have the correct support. Steel fiberglass and Arcrylic need the most, cast iron while heaviest is actually easiest as they are very rigid and need the least.
    mjsalmonjr's Avatar
    mjsalmonjr Posts: 5, Reputation: 1
    New Member
    		  
    #3

    Nov 12, 2010, 03:14 PM

    I am planning on installing a tub and surround (either acrylic or fiberglass). What kind of support will I need?
    massplumber2008's Avatar
    massplumber2008 Posts: 12,832, Reputation: 1212
    Senior Plumbing Expert
    		  
    #4

    Nov 12, 2010, 05:06 PM

    Hi all:

    You want to consult the installation instructions first, but if you can find it in your area I would advise you to use a STRUCTOLITE PERLITED GYPSUM product to set that tub... may be available at Home depot. This product is lightweight, it's easy to work with, and dries rock hard overnight.

    You could also use plaster of paris, mortar or even thinset from a bag... ;)

    Questions? Let us know.

    Mark
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Do I have to install the tub spout with a tub/shower set? [ 1 Answers ]

Do I have to install the tub spout portion of a tub/shower trim package?

Install New Basement Half Bath Over Slab [ 8 Answers ]

Hello, I plan to install a new half bath in a basement which has a concrete slab. The house is in Philadelphia. The main waste stack is 4" cast iron and it goes out to the city sewer under the slab. I want to find the horizontal run of the waste line under the slab and tap into it for the new...

Black water pipe underneath bath tub, is that connected to bath? [ 1 Answers ]

Hi, I'm taking apart my bath tub I guess its fiberglass I'm cutting it in pieces because I don't know any other to do it, but I saw that it has a black drainage pipe right in the middle of the tub underneath. Is that connected some how and can I cut around it or do I have to disconnect it from the...

Glacier Bay Bath install [ 11 Answers ]

I'm having trouble installing the Glacier Bay faucet. Any help?

Basement 1/2 bath install [ 9 Answers ]

I would like to add a half bath in my basement. The planned half bath is just below my kitchen sink on the main level and near the first floor laundry as well. My laundry is just off the kitchen but there is crawl space under it. In the area where I want to put the half bath, there is a 2" PVC...

View more questions Search