 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
I disconected a manual lennox thermostat it had two switches one was cool,off,heat,them
I disconected a manual lennox thermostat it had two switches one was cool,off,heat,emergency heat and the second was fan on or auto I didn't label my wires I have central air electric the wires coming out of the wall are black blue orange white green yellow and brown what wires went where on the lennox so I know what wires go where on my new thermostat which is a ritetemp?
|
||||
Check out some similar questions!
I disconected a manual lennox thermostat it had two switches one was cool,off,heat,emergency heat and the second was fan on or auto I didn't label my wires I have central air electric the wires coming out of the wall are black blue orange white green yellow and brown what wires went where on the...
Thermostat set to 70 yet temp continues to climb (80+). Can't trun off with thermostat switch, must go to air handler and turn CB offand then back on. Then can only get control by placing thermostat to EMER. Then temp responds to what is set in thermostat (both on and off). When going back to...
The system started to chirp during the night and will not stop. Any ideas on what is causing it? And how to stop it?
I have radient heating and a central air system. I currently have my heat set at 68 degrees and just this week the central a/c is blowing air off and on. The compressor is not running so what is going on? Any ideas? :confused:
I have a Honeywell 1 Heat/1Cool thermostat (TH6110D1013) that I would like to use with a Rheem 2 stage gas heat furnace. I think it is possible but would I get the same benefits as having a thermostat with 2 heat/1 cool? Would I just connect the W terminal on the Thermostat to the W2 on the...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
