 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
Check out some similar questions!
I recently bought a Mancesa toilet I think the model number is PM300 1.6 gallon flush bought from Menards. It will sometimes flush but most of the time it will not the toilet I took out was working correctly when replaced. Can you give me the manufacturer to contact to see if there are any recalls....
My toilet was working properly before tonight. :p There was no slow leak sound; nothing. Now when the handle is pressed, nothing happens. I opened up the tank and found there was no water in the tank. :( I've been searching the Internet for answers, but haven't found any that address this...
I purchased a mancesa toilet 4 years ago my lever broke and I am having as hard time locating another lever. The little square piece that fits in to the poceloan tank are to small my old lever had 2 small traingle on the edge of the 4 edges of the lever insert. It is hard to exsplain but there is...
New Mancesa San Marino toilet. Water level in bowl slowly lowers to minimum level within 10minutes. Friend of mine bought the same toilet and its happening with his as well. This is not related to improper or plugged vent line. Can't find Mancesa website ti askthem. Thanks for any replys.
The toilet flushes OK, but the water level is real low in the bowl after the flush. What is the problem?
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
