 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
I have a similar issue with the shower in my basement; however, being that it is in the basement, I have no access to the pipe beneath the tray. Help!
We have broken part of the outside of a shower tray which we believe is fibre glass. We have been told you can buy a bath repair kit that would do the job. Has anyone any information on this problem. John
Hello I plan on building a tile shower on an concrete slab with drain already in place (there was an existing show in place) which sticks up about an inch from the slab (possibly there is a piece I can remove to bring the drain back down below slab level). The walls will be 2x4 stud and I'm...
Hi all, am pretty handy but currently could use some advice. A new rectangular shower kit arrived, glass doors, tray and all but upon lining the tray up to the studs, cutting the floor below to refit the drain and its trap I find the shower tray drain lines up exactly on the top of a floor joist. ...
View more questions Search
|
