Ask Experts Questions for FREE Help !
Ask
    peterdilts's Avatar
    peterdilts Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Sep 6, 2010, 07:39 AM
    RTH6350D I am repalcing a TA 2000 thermostat with a Honeywell RTH6350D.
    The TA 2000 has W2, O, X, R, Y, G, and E. The RTH6350D has O/B, R, Y, G, E, Aux, and Rc.

    Which wires go where? (I'm assuming that the wires that have similar terminals on both models are just moved across. But the W2, Aux and Rc don't have an equavalent.
    joneo99's Avatar
    joneo99 Posts: 2, Reputation: 1
    New Member
    		  
    #2

    Nov 3, 2010, 05:49 PM
    I'm installing a Honeywell RTH6350D thermostat. I'm replacing an old thermostat with mercury and only two wires connected to it. Unfortunately, these two wires are not labeled. How would I hook them up to the new thermostat.
    Joshdta's Avatar
    Joshdta Posts: 2,549, Reputation: 45
    Ultra Member
    		  
    #3

    Nov 3, 2010, 06:50 PM

    Same as other post
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Replacement of Carrier Heat Pump Thermostat with Honeywell TH6000 series thermostat. [ 4 Answers ]

I have a Carrier Series 50QT Electric heat pump that still uses the original non programmable thermostat. I am trying to replace it with Honeywell TH6000 series programmable thermostat. The wiring on the existing Thermostat as follows: O - White, I am thinking this is the Reversing Valve? Y...

Replacing Honeywell LR69071 thermostat with Honeywell TH8320U1008 [ 4 Answers ]

I thought the transfer of wiring would be intuitive, but I was clearly mistaken. I have a heat pump with an aux electric furnace. Current connections are (by color) X - blue W2 - white R - red G- green O - orange Y - yellow E - brown Can anyone tell me where these should connect on the...

How do you bypass a honeywell basic programmable thermostat to run a/c until bad thermostat is replaced [ 2 Answers ]

Just a quick question.

Replaceing honeywell 3210d thermostat with hunter 44668 thermostat [ 0 Answers ]

Can anyone tell what wires go where? I've got red, blue, green, white, black, orange, brown and yellow. And the hunter thermostat has g, w/b, y/o, rc, rc1, rh, and y1.

Honeywell Chronotherm IV Plus Honeywell Thermostat, T8624D [ 1 Answers ]

Honeywell Deluxe Programmable Multistage Thermostat, #T8624D Chronotherm IV Plus I have 2 of above thermostats and have had for about 5 years. It takes no batteries and is directly connected to a 24 volt source. Have one upstairs and one downstairs. Have noticed at times that the LCD on...

View more questions Search