 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
Check out some similar questions!
Hi, I bought a Honeywell RTH 2300 thermostat and I'm trying to hook it up, the wires I have coming out of the wall are white, green, red, yellow and blue. I hooked up the matching colors to the W, G, R, Y and the blue wire I attached to the O/B. I have the jumpers set as follows: jumper 1 HG and...
I am replacing a honeywell non-programmable with a Lux TX9000TS. The old wiring inputs show e, aux, y, g, o, l, r, b, c (with is optional with batteries) and the new lux is w,y,g,b,o,rc,rh,c. Which wires go were?
I have been having problems for sometime with heat pump system & thermostat. I am trying to replace a Honeywell RTH7500 with a LUX TX500. The old Honeywell had this "Wait" feature that kicked in all the time and we could not get any heat. The new Lux thermostat only has five terminals: I...
I need help with wiring my new Honeywell RTH 6400 Thermostat. The old honeywell had the following colors and connections: E: brown wire AUX: white wire Y: yellow G: Green O: Orange R: Red C: Blue
Hello all,, I have just installed a new digital thermostat and it is working fine but it is 'cold' in my house,, now this may seem confusing but the thermostat is working turning on and off like it should but lets say I have it set on 80, it does reach 80 on the thermostat but is like 65 in...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
