Ask Experts Questions for FREE Help !
Ask
    lizmorris2007's Avatar
    lizmorris2007 Posts: 3, Reputation: 1
    New Member
    		  
    #1

    Nov 2, 2010, 11:17 AM
    Washer hose is up off the floor, but it still won't hold water?
    I have had this problem before & thought I fixed it. The water drain hose was on the floor so I put it back on the hook it fell from. And now we are having the same problem. The first thing I checked was the hose & it it still up! I have tried different cycles and it seems that the only thing that works is turning off the washer all night and then getting one small load washed for the next day. We take good care of our washer & dryer it has been cleaned, there are no back ups, the water pump is fine... So someone please help on why it still isn't holding any wayer
    ma0641's Avatar
    ma0641 Posts: 15,675, Reputation: 1012
    Uber Member
    		  
    #2

    Nov 2, 2010, 03:27 PM
    What exactly is your question? "the hose is on the floor-the hose is hooked up".. Are we talking the drain hose?
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Whirlpool Washer - Huge water leak - Hose Loose [ 8 Answers ]

Did a wash yesterday and all the water leaked out into my laundry room and into garage... it was quiet a big leak. I lifted washer and found a small black hose that is loose. It has brackets on the end , meaning it must clamp on to something.. and it seems to have come off... but I don't know...

Kenmore washer won't fill and water comes out on the floor [ 1 Answers ]

When I turn my top loading Kenmore washer it will automatically drain and water comes out the bottom of the washer onto the floor.

Kenmore washer won't hold the water [ 1 Answers ]

We are having a severe cold snap and so the pipe where my Sears Kennmore 80 Heavy Duty washer drains is frozen. I disconnected the black drain pipe at the back and have it draining out into the yard (this is temporary for a few days until we thaw). The problem now is when I start a cycle, the...

Washer drain hose squirting water during spin cycle [ 1 Answers ]

I have a Maytag washing machine that is 8 years old. It's worked just fine until recently. Halfway during the spin cycle, when the motor really "revs up", water squirts from the drain hose where it connects to the standpipe in the wall. An appliance repair person over the phone told me that it...

Washer won't hold water [ 1 Answers ]

My Kenmore 80 series heavy duty super capacity plus washer won't hold water. When it fills at the start of a cycle, it just runs and runs. Is there a drain plug somewhere that can be replaced? Or any other ideas what it could be. Also is there a appliance manual available online (free/...

View more questions Search