 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
Check out some similar questions!
I have a carrier forced air dual zone heating and cooling system with programmable t-stats at the first and second floor of my house. The unit is in the attic. The problem is at the first floor. The heat does not work at this level. When the user set temperature goes below 3 degrees than the room...
Hi All, I am using two Honeywell V8043E1012 motorized valves. One zone works but the other one you hear the thermostat click on when you raise the temp but the furnace does not come on. When I use the lower floor thermostat the furnace turns and I get heat upstairs. Is this the problem of the...
The question is if this will substantially raise my pg&e bill. The company that came out diagnosed the problem as the damper is not closing properly, nor sending the air to the right vents. The upstair control is sending some of the air downstairs and a couple upstairs do not work at all. So the...
Tell me the pros and cons of dual zone heating
I have forced hot air dual zone heating at my home. When I set the temperature at 70 in the first floor.. The fan is also blowing in my 2nd floor and the temperature increases in the 2nd floor to 70. Where as the thermostat in the second floor is set to 62. I looked at the furnace and saw a...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
