Ask Experts Questions for FREE Help !
Ask
    dot456ed's Avatar
    dot456ed Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Nov 2, 2010, 06:20 AM
    My hot water baseboard heat will not come on?
    I bled the air from my system the other day because it was making a banging noise when it came on and now it will not come on. The pilot is lit and there is power to the system.

Check out some similar questions!

Hot water baseboard heat noise [ 5 Answers ]

I have a 4 zone hot water baseboard heating system. When the thermostat setting is satisfied, the zone valves close with an extremely loud banging. The Valves are 3/4 inch copper, Honeywell #40004850-001. The heating system is 4 years old and this problem started about 2 years ago and seems to get...

How to bleed Hot Water Baseboard heat [ 1 Answers ]

I need to know how to bleed Hot Water Baseboard heat

Hot Water baseboard heat [ 2 Answers ]

I have a gas fired hot water boiler system. When the circulation pump comes on I can hear the water running through the pipes. I sounds like there is a lot of air in the lines. I have tried to blead out the air at the reqeristers but nothing comes out . When I have done this before at least water...

Hot water Baseboard Heat noises [ 1 Answers ]

Hi, I have a hot water baseboard heating system and I hear a ridiculous amount of "dings" during the night. It's not the occasional "ding" but constant dings through out the night. I am thinking that there is too much air in the pipes, but not sure how to go about releasing it. How can I do...

View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.