Ask Experts Questions for FREE Help !
Ask
    lclark's Avatar
    lclark Posts: 5, Reputation: 1
    New Member
     
    #1

    Oct 31, 2010, 11:17 AM
    Why boiler shuts down-could it be the riello timing out?
    Oil burner shuts down after 20 to 30 minutes -restarts w/o reset till thermos satifies.it is a w/m wtgo4/riello f4o/b5. On a call for heat,the boiler and circ. Start,and the circ. Cycles as it should while the system is warming up.after the returns get warmer{maybe 20-30mins}the boiler drops out and restarts within seconds{after the 12sec.purge}soon after the thermos satisfies then shuts the circ and the boiler down.at this point the thermometer on the boiler is 160-170,press 18-20.could the riello be shutting down on time-out?what are soft lockouts. the system is 5 going on its6 yr. I think its always done it.just had the annual last week.the tech. said he heard some do that.maybe it is normal but I wonder?

Check out some similar questions!

Why boiler shuts down [ 0 Answers ]

Oil burner shuts down after 20 to 30 minutes -restarts w/o reset till thermos satifies.it is a w/m wtgo4/riello f4o/b5.

Why boiler shuts down [ 0 Answers ]

Oil burner shuts down after 20 to 30 minutes -restarts w/o reset till thermos satifies.it is a w/m wtgo4/riello f4o/b5. On a call for heat,the boiler and circ. Start,and the circ. Cycles as it should while the system is warming up.after the returns get warmer{maybe 20-30mins}the boiler drops out...

Why boiler shuts down [ 0 Answers ]

Oil burner shuts down after 20 to 30 minutes -restarts w/o reset till thermos satifies.it is a w/m wtgo4/riello f4o/b5.

I changed the timing belt on 92 honda accord put all timing marks where they belong [ 2 Answers ]

I changed the timing belt on my 92 honda accord, put all timing marks where they belong. But the car won't start. It sounds like it wants to start but it does not.

Riello burner screws stripped out. [ 1 Answers ]

Does anyone know the best way to remove the 2 phillips screws that hold the nozzle assembly cover on the riello f3 burner? I did a cleaning yesterday, and was unable to remove the 2 screws, which had previously been overtightened and stripped by another tech. Any solutions?


View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.