 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Rheem criterion ii going into one hour lock out
Our criterion is about 7 years old. For the last few weeks, it will run the burners for a few minutes, run the blower to cool down, will repeat the cycle a few times and then goes into one hour lock out mode. We have had a technician out here who is stumped on what the issue is. We have replaced both the flame sensor and the circuit board. The technician checked the voltage on the pressue switch, the gas valve, and everything else. He says the gas valve is losing voltage. Any suggestions?
|
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
My friend has just moved into a house that was previously abandoned. His furnace is a Rheem Criterion 2 brand/model. We can't tell where the furnace filter should go or what size it is. Can anyone help me out?
Is there a rheem criterion 1 furnace? All I can find is info on a criterion II furnace and mine does not say criterion II. I want to change the filter, however, I don't know where the filter is. Can you tell me where the filter is located on a criterion furnace.
When running the ac the blower only stays on for three or four minutes,but the house remains too hot.why doesn't the blower keep running until it reaches the set temp?
Is it the furnace or thermostat? Sometimes the blower is blowing on the furnace and its cool air coming out and at the same time you hear the pilot trying to kick on. After 3 or 4 times of the pilot trying, you hear it kick on and the heat start blowing hot air... and I have the thermostat sat at...
Furnace blower fan and the pre blower fan come on at same time. And the ignitor won't light. Have to turn off power switch to stop both fans. I changed upper limit swith but still won't work. When it was working it was going great, returned and blower was running only but no heat. Thermostat...
View more questions Search
|
