Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
How do I figure out how much torque I need to move a turntable measuring 15 inches
[ 1 Answers ]
The turntable measures 15 inches and will have about 20 lbs of distributed load. I want to drive it with a dc gearhear motor via a belt to the central shaft which measures 1 inch in diameter.
Moving toilet over about 16 inches
[ 18 Answers ]
Hi I have attached some pictures, and was wondering if this is how I would go about moving a toilet. I have just recently graduated college and my parents let me stay in their rental house rent free so I want to remodel the bathroom before I move out. The current setup I have is right here, ...
Is it cost effective to move toilet?
[ 7 Answers ]
I'm thinking of moving my toilet in my main bathroom. My home is a split level built in the late 50's, and this bathroom is a full bath located on the third level with a half bath underneath. The toilet in question is currently located directly opposite of the sink with about two feet between...
Landlord broke toilet trying repair; Can I call a plumber & deduct cost from my rent
[ 3 Answers ]
I am having a chronic problem with my toilet for 2 months. It makes a VERY annoying noise in random time-frames from every 2 minutes to every 30 seconds. It's loud enough and annoying enough to disrupt my sleep. My landlord has made 3 unsuccessful attempts to repair the problem. The third...
Move cast iron tub drain a few inches?
[ 2 Answers ]
Is there a special part to move a cast iron tub drain a few inches such as the 'off -set closet flange' for a toilet? Am still working on the specs for remodeling a teenie bath in a pre-WWll bldg. We plan to rip out thick tile & lath/plaster walls in the tub alcove and replace with 1/2" cement... View more questions Search
|