Ask Experts Questions for FREE Help !
Ask
    bigmoose69's Avatar
    bigmoose69 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Oct 28, 2010, 02:38 PM
    My furnace is on, but there is nothing coming through vents.
    I pulled lower cover off to see if there was any flame. When I did this the furnace stopped and it has not re-started.
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
    		  
    #2

    Oct 28, 2010, 02:47 PM

    Only post once, duplicates take up space, get merged and confuse folks. Many furnaces have a safety interlock switch on the door. The unit will not operate with the door open but normally there is a small poirt or lense for you to see the flame.Reinstall the door, set stat for heat higher than the room temp. Look thorough the lense or feel the exhaust stack to confirm flame
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

No heat coming through vents [ 1 Answers ]

I have central heat/air and do not have heat coming through all of my vents, only some vents. It is a doublewide mobile home. What can I do?

Air hardly coming through vents [ 1 Answers ]

Hi. I don't know much about furnaces but here is the problem as best I can describe. The air was on and worked fine. After awhile, the house got hot and I noticed that the air was barely moving through the vents. I would appreciate any advice I can get!

Furnace on but no heat coming out of vents [ 3 Answers ]

Hi. I have a natural gas furnace that's about 7 years old, in a house I just bought this summer. Today I was noticing that it was pretty cold, so I turned up the furnace. It went on, but after a while I noticed that there was no air coming from the vents. I tried to turn it off and on again but...

View more questions Search