Ask Experts Questions for FREE Help !
Ask
    wayne306's Avatar
    wayne306 Posts: 4, Reputation: 1
    New Member
     
    #1

    Oct 23, 2010, 07:33 AM
    Neutral to earth is not tripping
    Neutral to earth shorthed trough a plug in a socket outlet will not trip the RCD, Can you state why please? However live to earth with in the same reason the RCD will trip. More over there is neutral in socket outlets because appliances are connected to them and they are working properly.
    Stratmando's Avatar
    Stratmando Posts: 11,188, Reputation: 508
    Uber Member
     
    #2

    Oct 23, 2010, 08:17 AM

    Neutral and Earth(ground) are at the same Potential.
    A GFI will trip when the hot or neutral draws more current than the other.
    If neutral and Earth are touching, and there is no load, Then, Hot and neutral are drawing same amount of current(zero volts).
    If Neutral and ground were reversed, a tester will NOT show it reversed.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Do single pole breakers hook black to breaker and neutral & grd to bonded neutral bar [ 6 Answers ]

I have an Eaton Cutler-Hammer meter/breaker box. (MB816B200BTS-FLCH) I want to run a 20 amp circuit (underground wire) from this box through existing underground conduit to a receptacle for a dishwasher. This run would be app. 15' to 20' and from my main house panel it would be 40' to 50'. All...

Mains neutral and generator neutral [ 0 Answers ]

I'm certainly not an electrician but one of expert around this web can help. I recently come across the problem where the ground volts raised up to 12 volts and UPS system (10KVA) was stopped working due to ground issue. Some electricians came but unable to find the actual cause then I ask from...

What happen if you connect some grounds and neutral to the neutral bus bar and the do [ 1 Answers ]

The same conect some grounds and neutrals to the ground bus bar just using whichever bus bar is closest to the breaker so the wires don't have to travel all around the breaker box is that OK and safe to connect wires like that thank you

Rate at which moon obits the earth assuming distance between moon and earth is 382,00 [ 3 Answers ]

What is the rate that the moon orbits the earth assuming the distance between the moon and the earth is 382,000,000 meters. Should I derive from Distance=RatexTime?


View more questions Search