Check out some similar questions!
92 ford ranger
[ 1 Answers ]
Do I need a scan tool to clear check engine light on a 92 ford ranger 2.3 liter after its been fixed or is there another trick?
Ford ranger 2.3
[ 1 Answers ]
Does the harmonic balancer need to be removed to install a new timing belt on a 4 cyl. Ford motor 2.3 1995
Ford Ranger
[ 1 Answers ]
2001 Ranger. I found dangling down from left side rear a hose with a cilp. It was attached to the axle housing. What is it for and where does it go. It just appears to be some type of air hose but is not attached to anything at other end. Should I be concerned? Thanks
92 Ford Ranger 2.3L
[ 1 Answers ]
Anyone, what problems does the Check Engine light going on usually indicate? I was coming home tonight, about an hour highway drive and the light momentarily came on, then off, on and off. Not a flicker, but for several minutes at a time. Truck is VERy reliable and there is no indication that...
My ford 2.3 in a 91 ranger
[ 3 Answers ]
Hey guys my problem is that I just swaped out a 2.3 for another 2.3 and when it runs it idles fine for a little bit then it seems like starts to miss then boggs out and dies and back fires like a cannon so bad it blew a brand new muffler out of round it kind of seems like it gets a rich smell of... View more questions Search
Add your answer here.
|