 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Programmable thermostat for gas heated hot water baseboard system
I am trying to find a programmable thermostat that I can install on my gas heated hot water baseboard heating system. I currently have double pole Dimplex (models td902w & td902) and Mears thermostats with dials on them. I would like to switch them to a digital/programmable model. What can you recommend? Thanks.
|
||||
Check out some similar questions!
I have a oil fired hot water boiler with baseboard heating. I have to replace the circulator and want to know how to bleed the system and then refill it when I am done. What is the proper procedure for this and what tools will I need?
I have a gas fired boiler that heats water, uses 1 circulator pump to pump water to 2 zones (each with its own thermostat), using copper pipe to baseboards with fins. I am having difficulty bleeding the air out. One zone heats fine, the other not at all. I think there may be some kind of air...
I own a rental home which has an oil hot water baseboard heating system. While inspecting the basement where the boiler, etc is located, I noticed that very few of the hot water pipes going to the baseboard heating system upstairs were supported by copper straps. Is this normal?
Hi all, first question here! I've spent an hour searching, learned a lot, but not a specific answer so I hope this isn't too common a question! One family ranch home with gas furnace, hot water baseboards, 40 year old Honeywell thermostats in main floor hall and basement main room. When...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
