Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Water heater leak (cold side only) where the nipple meets the water heater
[ 9 Answers ]
I just bought a water heater and completely installed it. When I turned on the water supply, a very very very slow drip can be observed where the cold water nipple screws into the water heater. I shut off the water, relieved the pressure and unscrewed the nipple. I then re-apply the teflon tape...
Navion water heater
[ 13 Answers ]
Navion vs other tankless water heaters. Any body had experience with Navion? Are they as good as the rest, or possibly better or worse. My company just picked up Navion, and I have my concerns, first and foremost, they are very expensive. Any input about tankless water heaters(especially...
Btu's to convert water to steam at boiling point?
[ 1 Answers ]
Hopw many Btu's are required to convert a pound of water at 212% at sea level?
Btu's to convert water to steam at boiling point?
[ 1 Answers ]
How many Btu's are required to convert a pound of water at 212% at sea level?
Connecting a tankless water heater and separate hot water heater
[ 6 Answers ]
What I have is this. An oil fired boiler that generates hot water for my house baseboard heating system. Contained within the boiler is a tankless heater that is heated by way of the firebox in the boiler. The tankless heater is used only for domestic hot water. It has a separate CW supply to the... View more questions Search
|